Transdermal Strip Removal

It’s certainly not unusual for transdermals to go bad (and I’ll even go so far as to propose that most will eventually fail and need removal), but this is definitely one of the most aggressive removals I’ve seen. That said, I have to admit that the stitched up version looks pretty happy in comparison to most mutli-transdermal removals. Procedure (but not the original transdermals) by Howie/Lunacobra.

I know I say this all the time, but seriously — any modification you get, be prepared to eventually remove it or worse. That doesn’t mean don’t do it… just understand the risks involved and decide whether it’s worth it for you… Nothing is guaranteed to last forever, and in fact, most things are guaranteed not to last forever.

Transdermal Implant Removal

Well, let’s see if this risks entry goes better than the last one where people’s heads exploded and we had hundreds of posts that many people will probably regret in the future when they reread them with a calmer head.

After a heavy blow right on the implant, Bena decided it would be best to remove (DIY) the implant. Luckily it seems to have come out fairly easily.

I know of another case where someone recieved a blow on a similarly placed transdermal implant, and things didn’t turn out as well. I asked the person to do an interview, but they decided against it, so I’ll try and recount the story as best I remember it. After receiving the blow, the surrounding tissue swelled and there were some signs of infection, but then it went down again, so the person paid it no more worry. Then, much later, they started getting severe headaches, and when they became unbearable, they went to the hospital. Doctors discovered that the infection had not gone away, but simply moved underneath the implant. It had eroded a quarter-sized hole in his forehead, and the doctors warned that had he waited a few more days to come in he could have dropped dead.

I really want to extend thanks to people (and practitioners) who share their stories when things go wrong. I think for this community to grow safely, sharing what we know about the problems is in many ways more important than sharing what we know about performing procedures.

Why transdermals suck, by yours truly

Just like some other big name guy who shed blood for his followers, I shed blood for the readers of Modblog. People are complaining that Modblog isn’t updating and I wanted to help, but without new submissions to BME there is little for me to choose from. So instead of complaining or making excuses, I took action and used this lull in post as the encouragement I needed to get those godforsaken transdermals removed from my noggin.

First and foremost, I want to be clear I knew the risk going into the initial procedure and I realized the super low success rate of transdermals. Hell, I think the BME Encyclopedia entry on transdermal removal summed it up best.

All in all, because of the low success rate and complications, transdermal implants are one of the few procedures that BME recommends against — although we fully support people’s right to get them, if and only if they fully understand and accept the risks.It should also be noted that a variety of professionals are trying to solve the problems with transdermal implants.

I got my implants done by a highly reputable practitioner, whom I also consider a friend. As far as procedures go, it was as spot on as one could hope for.  In fact, long time modbloggers may even remember this post Shannon made of them when they were brand new.

As is the case with most transdermals, they never actually healed. The wounds around the transdermal post oozed, well, pretty much constantly. The channels the implants were inserted in stayed seperated from the underlying tissue and bubbled up. Hair growth was nullified in a large circle around each of the implants……….and this is just what I dealt with in the first year.

I tried lots of remedies, some holistic, some horrific. I used everything from chamomile tea bag soaks to injecting alcohol around the transdermal stems  to dry out the excess lymph. Nothing had any lasting affects. As the years went on the implants just got worse, most started migrating and the first one (as you can see in the before picture) rejected to the point of one foot coming completely through the skin.

dsc_0023

While there has been no definitive study on the long term success rates of transdermal implants,  20% or less seems to be pretty accurate. I’d even go so far to assume that most of those will not last indefinitely and that a lot of the “successful” ones aren’t actually fully and properly healed.

I (speaking purely as myself, and not for BMEzine.com) feel that the  transdermal implants, as we know them, have  no place in modern body modification. The original design by Steve Haworth, was ground breaking and without that original design we may not have the microdermal anchor design that we have now. However, with the gray area legality of the implantation procedure and the unlikeliness of them properly healing, I just don’t see why they are still being commonly offered. Don’t get me wrong, if a practitioner wants to do some on a highly modded well informed client, I am not opposed, I just don’t see the point. However, the fact some practitioners will do these on any walk in client is an atrocity and a total F-You to our entire community.

One thing that I feel will certainly make transdermal implants obsolete is large gauge microdermals, such as those offered by Anatometal. With them offering micros up to an 8 gauge, that can be inserted with piercing techniques (no invasive surgery) and also removed far easier that transdermals, I just can’t see the need for an invasive and potentially illegal surgical procedure with a low success rate.

Anyhow, that’s my take on the subject, feel free to chime in your opinions on this topic in the comments. For a whole lot of photos from my transdermal removal procedure, keep on keeping on.

dsc_0026-2

dsc_0031

dsc_0037

dsc_0042

dsc_0045

dsc_0053

dsc_0056

dsc_0064

dsc_0077

dsc_0079

dsc_0083

dsc_0098

dsc_0108

dsc_0111

All photos, thanks to Robin Scott.

Have your own transdermal failure stories/pictures that you want to share? Email them to [email protected]

Still-Swollen Postbirth Pregnancy Belly

Ok. Not quite. But that’s the image that came to mind when I saw Scott Creel’s (of Southtown in South Fort Smith, Arkansas) bumpy forehead, swollen and with a slight excess of skin after removing the large 5th generation subdermal horns he’s worn for the last two years. This photo was taken a few days after removal, and the swelling should last as long as a week. When Scott first got the horns, he was debating between subdermals and transdermals, and after a couple years of wearing the subdermals he feels it’s not the aesthetic for him and that he should have gone with the transdermals, which will happen once everything is healed, perhaps in combination with some white ink and scarification.

removal1

While I’m posting removals — and speaking of transdermals — I can’t avoid this gory excision of a big pile of early transdermals (perhaps to be replaced with the new generation later?) done by Samppa Von Cyborg. It may look like a lot of trauma, but removing them in large strips is much less messy than the cutting each one out separately, and more importantly, ensures that all scar tissue is excised, leaving as smooth a scalp as possible when the procedure is complete and healed.

removal2

“You’ve come a long way, baby”

When you compare Mechanical Demon (tattoo artist at Harness in Helsinki, Finland) from 2007 to 2012, you can really see what an improvement the jump from tattooed and pierced person to full heavy-mod enthusiast has made. In addition to some more tattoo work, I can also see that he’s added some sternum implants, a pair of transdermal implant spike horns, radical ear pointing and I think lobe removal, as well as black eyeball tattoos. Really checked off that wish list quite successfully, didn’t he?

mechanical-demon-1

You can zoom that picture but the others in this entry are at full size. Anyway, to no small part because of his striking and eye-catching appearance he’s had the opportunity to model for some great photographers, but one shoot that really struck me was this amazing photo by Tinttu Henttonen, with make-up by Mia Magia. Click here for a close-up that shows his ear very nicely — the reshaping work that was done on it is quite something.

mechanical-demon-2

Another photo I liked was this old-time portrait, which also shows his mods nicely and reveals one that I’d missed in the first photo, a set of subdermal horns higher up the scalp, a placement that works very nicely with his transdermal spikes (but might otherwise look odd on its own).

mechanical-demon-3

A lotus flower is born under the skin, grows under the skin and rises out of the skin…

At this point in my life there are not too many “extreme body mods” that I actively consider getting. For instance, scarification doesn’t hold up well on me, transdermals had to be cut out of my head and eyeball tattooing simply freaks me the hell out. However, the one “extreme mod” I still could see myself getting is a new subdermal implant. I LOVE the little ear flat implants for instance. I am also planning on swapping out my old school titanium circular barbell implant in my hand for a newfangled silicone one of identical shape and size. My left had used to have a Titanium cbr until months later I caught a bad case of cellulitis in the hand, freaked out and cut that bastard out! Had I known then, what I know now I would have just taken some cephlex and bada bing, it would have been better. Anyhow, I am currently lasering off the tattoo on the hand and that has me thinking I’d like to do a detailed silicone implant on that hand then tattoo over it.

This lotus implant. done by the only man I’d trust to do such a thing on me personally, XPureX, has been under the skin for two years and looks absolutely awesome! It definitely has gotten my creative juices flowing and it has helped to respark my interest in getting a new one myself!

screen-shot-2012-07-19-at-80046-am

“As a lotus flower is born in water, grows in water and rises out of water to stand above it unsoiled, so I, born in the world, raised in the world having overcome the world, live unsoiled by the world”
-Hindu Prince Gautama Siddharta, the founder of Buddhism

BME’s Big Question #7: Microdermals, The Universe and Everything



Welcome to BME’s Big Question! In this feature, we ask a handful of the community’s best and brightest piercers, tattooists, heavy mod practitioners and shop owners for their opinion on one question or issue that’s affecting the body modification community. Many, many thanks to all of the contributors.

If you’d like to be a part of future editions, or if you have an idea for an issue or question you’d like to see addressed, please e-mail me.

This week’s topic comes (and features follow-up questions) from Rachel Larratt:

“How do you guys feel about doing microdermals? Is it the same as a ‘regular’ piercing or different?”

* * *


Meg Barber
I’ll step up to bat with this one.

I hate microdermals with a capital H. I think that while they do offer some possibilities that haven’t been seen before as far as placement and jewelry styles, they are problematic, hard to successfully heal for the long haul, and are just an all-around hassle.

I see a lot of them reject and leave pretty nasty scars, because most of the time the client isn’t looking at it on a regular basis (because of its weird placement) to see if anything is wrong with the piercing. I see a lot of them with massive piles of shmutz built up around them for the very same reasons.

People don’t tend to view them as “permanent” at all. It’s something to get done now, like an earlobe or nostril, and there is no forewarning about the issues that arise with them from most piercers.

When they started to get huge, I admit, we got on the bandwagon, but we have certainly backed off on our enthusiasm with them since watching issues arise. This past month, Vibe magazine had a blurb about microdermals in their fashion issue. It showed a piece on a girl’s side that we did, but what it didn’t show was me resetting that sucker back in there two weeks prior to the shoot because it had been shifting outwards.

I know that there are a lot of people gung-ho about them, and they can be fun, but I think they should be viewed much like surface work with a more permanent edge.


Ryan Ouellette
I was leaning towards a negative opinion of them a few months back, but then I started experimenting with longer stem lengths and now things are going a lot smoother. I’ve done about 250 of them over the last 18 months, I’d say the first 200 were 3/32″ rise, no matter the location. I was getting some tilting, and the occasional failure, but still maybe a 60-70 percent flat heal success rate. I think out of that initial 200 I personally removed maybe 15, and a few were cut out by other shops. Now with the 1/8″ and 5/32″ stems I haven’t had a single significant tilt or failure in about five months. The only ones I’ve taken out have been for work reasons, or people just not wanting them.

[Ed. note: Ryan adds, “I just checked my numbers on past microdermal orders and I’m under on my guess for how many I’ve done, but the success rates are still pretty accurate.”]

A big issue about them is removal. I’m the only shop in my area that takes them out without using a scalpel. I just use a needle and micro surgical hook to take them out without enlarging the stem hole at all. A lot of people are terrified of trying them because they think they have to get them cut out if they fail.

Overall I’m a big fan of them and I try to push people towards those over surface piercings for all nontraditional surface placements. With how easy they are for me to remove I don’t even refer to them as permanent. I just call them semi-permanent and offer future removal for free for any I’ve installed.


Rachel Larratt
Does anyone else offer free removal as standard practice with a microdermal?

Microdermal rejection scars look fairly extensive from the photos on BME. Do you suggest to clients the immediate removal at the first signs of rejection or do you generally try to reseat the microdermal?

In what situations have you refused to do a microdermal?


Ryan Ouellette
I’ve tried re-seating once or twice but now I think it’s just pointless. And I usually tell people that if they can see the foot through the surface and there is any redness it’s time to remove it before you get an ugly scar. But if I take them out early I get barely any scar at all.

I only refuse if the skin is too delicate to support the jewelry—areas like the inner wrist or high anti-eyebrows. Or areas where you get a lot of friction, like low hip placements.


John Joyce
I have a pretty high success rate with microdermals as well. In a lot of cases I think they are a much better option than surface piercings. However, I think it is the responsibility of the piercer as a professional to go over the risks and make sure the client understands them. A lot of people make a big deal out of their “permanence,” but honestly, removal isn’t that hard. Like Ryan said, they don’t need to be cut out with a scalpel, and a lot of the time I can remove them without even using a needle. Scarring really isn’t anything major with these and it’s a lot less than you would get with a rejecting surface bar.

The only area I’ve seen consistent problems with these is along the collar bones, especially more towards the shoulder. I won’t even do them in that area anymore. Most of the ones I take out now aren’t because of rejection, it’s because the person didn’t want them anymore, or, in most cases, it’s because they were done with inferior quality jewelry. I always remove them free of charge since it’s something the client can’t do themselves, and I don’t want them trying to.

I’ve done these in a lot of different areas. A lot of my friends, including my girlfriend, have some that are over two years old now. These are in places like the lower back, sternum, anti-eyebrow area and above and below a navel.

I have re-seated some that were not that old, and they healed up fine. I think this really only works if the piercing is still fairly new. Scarring keeps coming up, but honestly I haven’t seen any real scarring from these at all.


Meg Barber
I’ve had a 50/50 success rate with re-seating ones that are tilting; some work, some don’t. The areas I see the biggest problems are the back of the neck and cleavage, and the shoulder is a troublesome area as well, like John said.

We generally remove them for free, unless they were done elsewhere. I don’t cut them out either, just a little massage usually does the trick, although the feet with the big hole…those are a a lot tougher to remove, and sometimes need to be helped out with a needle. As for scarring, the worst I see tends to be on the rejecting nape placements. Lots of buildup with those, not pretty.

Are there any other placements you guys shy away from? We don’t do the thin-skinned areas Ryan mentioned, or hands or feet—too much trouble.


Steve Truitt
I do a lot of microdermals, and I also try to talk people into them instead of surface piercings when they come in for something like a sternum, anti-eyebrow, etc. I rarely take any out because of rejection—mostly I remove them because of issues at work/school, or the person just doesn’t want them anymore. I’d say from what I’ve seen we have about an 80 percent success rate with them.

I offer free removal if they were done at my shops, and sometimes even if they weren’t. There are a lot of shops around here that use the horrible ones made in Thailand/Korea/wherever it is that sell them for $1 or less. When educating people about them and why they aren’t working out for them, most of the time they understand what I’m saying and come back to get them done with the proper jewelry in them, so when it seems like a situation like that, I don’t charge for the removal.

When I remove them, I just massage the tissue until the heel can pop out, then pull them out. Sometimes I have to slide a needle underneath them to cut through the scar tissue that grows through the holes, but that’s only about 50 percent of the time. I’ve seen some scarring, but normally less than from surface piercings or other rejecting piercings.

If someone wants to keep the microdermal when it seems to be rejecting I’ll try re-seating them if there isn’t a lot of scar tissue built up already, or if there is, then I have them wait a few weeks till it goes down and can be re-done. The place I’ve noticed having the most problems with tilting out and needing to be re-seated more often than anywhere else is the lower-center forehead, the “third eye” position, or closer to the eyebrows there as well. I think this is due to all the movement in the area, so I warn people that come in for those before doing them.


Rachel Larratt
There are several variations: solid base, one hole, two holes and three holes. Which design do you generally prefer?

Steve Truitt
I prefer the Anatometal pieces with one large hole. I’ve used the IS and Wildcat pieces as well; IS are my second choice. The bases on the Wildcat pieces are a little too thick for my liking, and the finish isn’t as nice as the Anatometal and IS pieces.
The Anatometal pieces tend to heal much better and more securely in place in my experience, however that does make them slightly harder to remove than the others.

Stephen DeToma
I’ll chime in “thumbs down.”

I was really excited when I first saw them. I had a pair of them put in my forehead by Didier at Enigma a few years back and it didn’t take me long to start changing my mind. I’m also not a huge surface piercing fan to begin with so I guess I should have seen that coming.

The whole issue of removal was a great deal more complicated when people hadn’t removed them a whole lot. I don’t like doing them so generally I pass and book an appointment for the boss, but I’ve gotten very good at taking them out.

The biggest problems I see with healing is people’s inability to remember they have them: catching them, snagging them. I had one guy that had lost the top of an anchor he had in his nape while on vacation. The shop he went to put a 6 mm steel ball on the jewelry and he then spent a week in bed till he came to see me—the thing had grown out completely sideways.

But, curve balls aside, if someone is coming in to take an anchor out, removing the threaded end and attaching a threaded taper, gently enlarging the pocket under the tissue by stirring the jewelry a bit works pretty well for me. It feels a lot like losing a tooth; just kinda wiggle it until those threads let go. As Meg said, the large hole model is a little trickier.


Meg Barber
That’s how I take them out too, Stephen, although remember that one disaster you had to remove when you were guesting here? That thing was so scary!

Stephen DeToma
Yeah, that was one of the authentic “surface anchors” that has one half bent like a closed staple and an arm that holds the gem. It was the first time I had seen one and was a little puzzled. You can’t just wiggle those things out because of the shape; it’s similar to the old bar trick of folding a drinking straw in half and inserting it into the neck of a bottle to pick it up. For that one, I actually used the bevel of a needle to widen to hole enough to take out. That poor girl was completely freaked out.

That’s another thing about anchors: I think there’s just as many people who understate what can happen with anchors as those who get everyone all wound up about scalpel removal. I think it’s important to inform the client of possible risks without downplaying them or scaring the crap out of them, and also, to recognize the capabilities and limitations of anchors—meaning, they open options but they aren’t foolproof.


Meg Barber
As for the base I prefer (back to Rachel’s question), I like the IS ones for ease of removal, but the Anatometal ones for staying power. Those suckers are tough to get out though. I’ve got a client that got a “Madison” placement dermal, and it rejected three times with the IS one. I popped in an Anatometal one, and it’s going strong at about eight months now.

I’m pretty thorough when I explain the hows, whys and removal aspects of them, but not everyone understands, even after a talking-to. People see pictures of all this crazy stuff done with them (like eyelids) and then get irritated when they find out that they can’t just take them out when they want to and put them back in like a standard piercing.

My big question for all of you is how long do you tell your clients they take to “heal”? I tell mine that they will settle in after a few weeks to a month, but can never really be called “healed,” as there is never gonna be a neat little dry pocket around that base.

Also, what is your aftercare suggestion for them? Do you have your clients bandage them initially?


Ryan Ouellette
I tell people the “initial healing period” is about a month, but that it can take a few extra weeks to toughen up. I also tell them to wait at least six weeks to come in for an end-piece change, or to wait three months if they want to do it themselves. I cover all mine with a Nexcare waterproof bandage and tell them to leave it on for anywhere from one to three days depending on the location.

Allen Falkner
Microdermals hit about the time that I started transitioning out of piercing so I’ve only done a handful. So, it’s really hard for me to formulate much of an opinion. [Ed. note: But that’s never stopped you before!]

As for my like or dislike of dermal anchors…personally, I like them. Less invasive than traditional larger transdermals and if well-placed they hold up infinitely better than surface piercings. If anyone has ever read one my rants you’ll know I’m not a big a fan of surface piercings…but I don’t want to get too far off-topic.

As for removal, I’ve helped with a couple, but that’s usually because Allen gets roped in when it requires brute force. I’m definitely not shy about getting out “stuck” jewelry. As for price, well, I’m sure everyone has their own opinion. Me, I think all removal and most general maintenance should be free, no matter who put in the jewelry. It’s been my experience that people normally tip really well for a free service. Plus, it’s good for business and ultimately good for the community. Each crappy piercing that walks down the street or appears in the media is a blow to the entire piercing industry…and you know how it is. There is a certain satisfaction about fixing someone else’s mistakes that really makes doing your job worthwhile.


Meg Barber
Price is a good point. What are you guys charging to do microdermals? Do you include the foot in the price?

Our cost is $75 for the service, which includes the base, then the additional cost is what frontal you want on it—disks or gems or whatnot. And we take them out for free.


Steve Truitt
I charge $80 for one and $60 for each after (in the same session on the same person) with a disc on them. If they want gems, etc., the price goes up depending on the end.

Ryan Ouellette
I charge $70 for one, $130 for a pair, $60 each for three or more. Price includes standard disc ends; gemstone or alternate ends are an additional $10-$15 each. Free removal if I installed it, $20 if it was put in somewhere else.

I charged $80 when I was first doing them, but now with IS lowering their prices I can’t see charging that much. I only charge $65 for a surface piercing with an Anatometal flat surface bar and those cost twice as much as microdermal jewelry.


John Joyce
I charge $75 for one with a flat disc, more if they want a gem. Each additional one done after that I take a little off the price. Free removal whether I installed it or not.

Stephen DeToma
I believe were running $50 for a basic disc, $75 for gems.

John Joyce
Since we’re talking microdermals, I’ve had two different people come in over the last two days that both had microdermals done on their sternums at a different shop in Syracuse. One girl’s fell out within a day, and the other girl’s was sticking way out and was about to fall out. I’m not sure what method was used to put these in, but there was a huge pocket made. In the one that was still in, there was a gaping hole around the post of it. The rise used on both of them was far too long for these girls as well.

I think most people in this forum are probably getting somewhere in the 85-90 percent success rate with microdermals, but I think it’s really important to remember that we aren’t the majority of piercers out there. There are going to be a lot more piercers only getting 50 percent success rate or maybe 75 percent at best. This could be from any number of things: using poor quality jewelry, poor installation technique, poor aftercare, poor placement, or just not really understanding what a microdermal is.

My point is, with piercing, but especially microdermals it is important for the client to do their own research first. It is also important for the practitioner to make sure they fully understand microdermals, and how they work.

What do you think? Let’s hear it in the comments.

* * *

Please consider buying a membership to BME so we can continue bringing you articles like this one.

BME’s Big Question: #1


Welcome to the very first edition of BME’s Big Question! In this weekly (hopefully) feature, we’re going to ask a handful of the community’s best and brightest piercers, tattooists, heavy mod practitioners and shop owners for their opinion on one question or issue that’s affecting the body modification community. Many, many thanks to all of the contributors.

If you’d like to be a part of future editions, or if you have an idea for an issue or question you’d like to see addressed, please e-mail me.

This week’s question:

Is it possible to be too pierced or tattooed to work in a tattoo/piercing shop?

* * *

Meg Barber

Call me old fashioned, call me “against modification” … whatever. I’ll look at you and laugh, but yes, you can be too modified for this industry.

The way I see it, the average client isn’t coming in to completely transform their body. They are coming in for a cute accessory, a nice little tchotchke to accent their face or body. They aren’t completely immersed in the modification world, nor do they wish to be. They will identify more with a piercer or tattoo artist that is lightly and attractively modified over one that is totally pierced, tattooed, and implanted.

I work in a very high end piercing spa in Manhattan. At our studio, I am the most heavily modified person on the staff. Clients really need to hear me speak before they will trust me at times, and they never believe me when I say something doesn’t hurt or whatever, because I am obviously a pain freak. Also, my mods can be a distraction — some clients are too busy staring at my earlobes to listen to what I am trying to tell them!

We carefully screen our employees before we hire them, and if we deem them to be too modified, we pass on them even if they are very skilled. We want our staff to reflect our clientele, and I know Maria really had to do some thinking before bringing me on because of my appearance.

I know it sounds a little judgmental coming from the standpoint of a heavily modified piercer working in the modification industry, but that’s the way it is with our shop, and I personally like the policy.

* * *

Stephen DeToma

I absolutely think that it’s possible, but that’s not to say that it applies to all businesses. I think a large part of the equation involves the vision the owner of the hiring studio has for the business. It’s unlikely that a tattoo studio supplementing its monthly income through piercing would hire an individual with heavy, visual modifications. The studio I apprenticed in, which was largely a flash-based tattoo studio, fired a tattoo artist for tattooing his chin/lower lip area. I don’t think there’s any denying that there are people who operate tattoo and piercing studios across the country, people who modify people’s bodies on a daily basis, who are themselves uncomfortable with modified individuals.

It’s certainly putting all of your eggs in one basket to assume that simply because you have these modifications, you’ll be able to get a job piercing (or otherwise).

Region certainly will play a part. You may be too pierced to work at a mom and pop tattoo shop in Kansas, but the same person may have no problem finding work in Oregon, Austin or elsewhere. I think it’s important to point out that, while it’s each individual’s right to do with their body what they see fit, it’s a business owner’s right to build their business in the same manner, regardless of if anyone else likes it. A studio environment, for as relaxed and open as they typically are, is still a customer service based, retail environment that requires public interaction. Who do you cater to? Who is your client base? And what is their level of comfort?

Is it a question of approachability? The owner may be concerned with people’s ability or willingness to converse/have work done with someone bearing such strong mods. I think we all know that to judge a book by its cover is foolish, but the general public who do not operate on the same level we do from day to day, tend to shoot first and ask questions later.

Do the quality of the modifications come into play? Someone with a great deal of crooked, improperly placed piercings in their face for example, does not make a great spokesperson for the business. What about the subject matter? If you have a pentagram tattooed on your face or an upside down cross branded on your forehead, you’re sending a strong message without saying a word to potential employers.

* * *

Steve Truitt

I think it would depend on the place they’re trying to work. Most tattoo artists are a lot more conservative in appearance than a lot of piercers, so I could see it harder for someone to get into tattooing if they look really extreme.

Many “normal” people are getting tattooed now because of TV shows like Miami and L.A. Ink. I could easily see a lot of those type of people getting scared away if they went to a studio and saw someone with giant horns and a huge plate in their lip, so if that’s the type of client a certain studio caters to, then it definitely wouldn’t work to have someone that looks that crazy working there.

On the other hand, personality can go a long way. I’ve seen quite a few heavily modified people that are extremely friendly and outgoing and have no problem making conversation and dealing with other people. Then I’ve seen a lot that are distant and withdrawn and they don’t seem to be able to relate to people and that can make people very uncomfortable, which wouldn’t be good for a working environment.

The quality of the work is also important to note. If someone is covered with very well done professional work, it shows. If they are covered in a bunch of crap they did themselves or at someone’s house or by someone who just sucks, it also shows and makes the person look that much more unprofessional. Also, if the work they have done is aesthetically pleasing to look at and fits the person then that person seems to have fewer problems dealing with people.

The Lizardman is a great example of this. Everything he has done is obviously professionally done and looks like it should be there. Nothing he has looks out of place or like it doesn’t belong on him. His intelligence and personality also play big roles in how his interactions with people go. Any time I’ve seen people meet him for the first time they go away saying, “Wow, I just met the Lizardman, he’s so cool,” etc. I’ve seen poeple meet other heavily modified people that aren’t as outgoing (I’m not going to name names here and offend anyone in particular) and walk away saying things like “Wow, that guy was crazy looking … what a freak! Why would he do that to himself? What’s wrong with him?”

So overall, it may not necessarily be that someone is too modified to work in a shop, but that they don’t fit in because of a combination of their mods and personality.

* * *

Ryan Ouellette

I never ever in my life thought I’d get to a place where I could legitimately have a “kids these days” opinion on something, but here it is. Body modification, like all pop fashion, is just getting stupid. The problem is that “kids these days” don’t ease into modification, they jump in face first — pun intended. I don’t think that studios have a problem with modified employees, I think they have a problem with unprofessional-looking employees. In my studio we all have lots of visible mods, mostly tattoo sleeves, but I also have large gauge punched out conches, microdermals on my face, numerous piercings, yada yada. But I still consider myself to be professional-looking. As a studio owner myself, let’s say two people came into my studio with the exact same experience looking for a job. If both are heavily modified, but only one does it in a way that complements a professional look and mentality, then that’s the one I would want.

A lot of it has to do with clientele. You can look one way to do surface piercings for college kids, but you probably need to have a more subtle appearance to do $200 gemstone nostril piercings for older women. Most young people are just stupid, for lack of a better term, and they can’t imagine a world where they are 30 and need to pay a mortgage. They want to just live in their 17-year-old world and sell T-shirts at Hot Topic for $8/hour dreaming of the day they can be a super cool body piercer — and I would know. Because I did that.

I’m of the opinion that your hands/neck/face should not be tattooed or heavily modified until you have a steady career. I think that this is a profession where body modification should be embraced by both client and practitioner, but people should still treat it as a profession and try to maintain a respectable image.

* * *

John Joyce

I don’t think it’s being too pierced, too tattooed, or too modified that keeps shop owners from hiring people. I think it’s being too covered in poorly done tattoos and piercings that keeps studio owners from hiring them.

For example: If a person has a lot of horribly done piercings or tattoos, or cheap jewelry all over their face, then it definitely doesn’t speak well for that particular person’s interest in the industry. If someone has taken the time to get 15 or 20 piercings, then by that point they should have enough interest in the art of body piercing to do some research. They should know the difference between a well placed piercing and one that looks like it was just smacked on with a dart gun. They should know the difference between a super shiny mirror finished Anatometal barbell and a dull piece from some mall store (*cough* Hot Topic *cough*). If they haven’t picked any of that up, then it shows that they really don’t care that much about this industry, or themselves for that matter, and I wouldn’t even waste my time interviewing the person. Now if someone walks in with 15-20 well placed piercings, all with super nice Anatometal, or Body Vision jewelry in them, I will immediately know that this person cares about their piercings, and put thought into them, because that’s exactly what I’d expect them to do with clients that they will be working with.

The same goes with someone looking for a tattoo apprenticeship. If you walk in and are covered with absolute shit, then it doesn’t speak very well about yourself.

The more interested you are in anything, whether it’s body piercing, tattooing or stamp collecting, the more research you should do on the subject. That research and your knowledge on the subject is what’s going to put you ahead of the 15 other people that have asked the studio owner for an apprenticeship that week.

It’s important for these people to remember that getting 15 piercings in two months, or stretching to two inches in six months, doesn’t impress a good piercer. It shows you are impatient, and not very responsible, and that is about it. The same can be said for kids getting their hands, throats, or even their faces tattooed before they have any other real coverage. It doesn’t impress a quality tattoo artist, and it doesn’t tell us you’re hard core, or more bad ass than your friends. What it does show is that you are impatient, and have put zero thought into the rest of your life.

There once was a time when tattoo artists wouldn’t do those things, and piercers cared more for their clientele. Unfortunately, this industry is full of rock stars and posting images that might make ModBlog seems to be more important these days.

* * *

Joy Rumore

I do think that one can be “too modified” to work in a typical street shop.

A large portion of customers coming into street shops are first-timers. Most come in with groups of their friends. All minors come in with their parents if they are planning to get worked on. Before they even get into the shop, they are nervous. Often, extreme modifications or a large amount of modifications can make people more nervous if they aren’t used to being around them. Things that one is unfamiliar with are usually first interpreted as scary. They may project this view onto themselves and worry they will be classified as a “freak” even if they get a small, discrete piercing or tattoo. Some even think these heavily modified people couldn’t possibly be competent enough to perform a clean, safe procedure. Usually this is based on some fear that the practitioner must be mentally unstable or on drugs to think the way they look is acceptable and healthy.

If a minor or someone there with peers finds the extreme/multiple modifications attractive or interesting, they are often afraid to admit to their parents/peers that they are attracted to that kind of look because they will be be scolded or shunned. On top of that, parents may be more apprehensive about allowing their child to get a small piercing, viewing it as a “gateway drug” into looking like someone on the fringe of society and thus lessening their chances for a successful life. Most parents constantly strive to open doors for their children, not close them over something as “trivial” as a piercing.

Practitioners at specialty shops or custom/appointment-only shops tend to have better reactions to their heavy modifications because they are frequented by those in search of being heavily modified themselves. If those visiting specialty shops are not into heavy modification, they tend to expect seeing those who are extremely modified because these artists are often seen as “more serious” about their chosen lifestyle/career.

Day in and day out in every shop I’ve worked in (no matter what state), there are those who gasp and denounce what they see in our portfolios. I’ve always tried to educate those people and show them modifications on me so they can see that they are less scary or painful. I take more of an anthropological approach to these interactions. I explain the history and meaning behind the modifications. I try to compare personal body modification to more mainstream, accepted forms like cosmetic surgery, makeup and even haircuts. I don’t win them all, but I win most.

* * *

Ron Garza

While I know many people will say no, I will answer with a resounding yes.

While it is true that people do come into a tattoo shop expecting to see the people working there somewhat covered in ink and some piercings, I don’t think having a very visibly modified staff is always needed or warranted. While yes, it is always better to speak from experience on things to clients, I don’t think the demand is that great for clients to know what having a one-inch lip or nostril hole is like to warrant so many people having them now.

Some cities are much more tattoo friendly than others – Denver, Atlanta, Austin and Seattle and Portland quickly come to mind. But then, traveling through parts of the south, mid west and east, the attitudes can be extremely different — even for just one-inch stretched lobes. In some of these communities where tattooing or piercing aren’t as prevalent as in other urban markets, I have personally witnessed staffs’ outward appearance actually intimidate potential clients and keep them from getting work or coming in. While some of us will all say we don’t do this for the money, we will all agree that no money sucks ass. So for the most part, we are doing it for survival, and are therefore doing it for the cash. Why alienate yourself further by losing all sense of resembling something somewhat human?

While I readily admit my views on the subject are more than a little biased from being visibly heavily tattooed and pierced for the better part of 15 years — and I do have respect for those that are “lifers” and are able to live life with visible heavy mods — I don’t think that life is for everyone, nor could it be. The thing separating individuals is the mental and emotional strength it takes to deal with public on a daily basis while being heavily modified. Many can’t deal with it mentally and I have personally known a few people that died at their own hands, in my opinion, because of it.

I used to want to tattoo my face (more), but I had promised my father, who already knew about my extremist nature, I wouldn’t tattoo my face until after he passed. At the time, I didn’t think I was going to make it past 21, much less be alive 16 years later, so I really wasn’t thinking of the future then, nor was my world view quite as encompassing as it is today, which definitely changed my outlook on things. I simply thought my father didn’t know the full depth of my passion for this.

What I didn’t understand was that he had the benefit of years of wisdom of being alive during very racially sensitive times and he knew first hand that division that exists in society for simply being different. For me to want to oust myself from that mainstream, on my own and on purpose, was something he couldn’t understand. Now that I have the benefit of a few years behind me, I can see the wisdom in his words.

The actual act of piercing is as old as man itself, and one can not deny the fact that for the most part, modification is a very western thing in today’s fashion circles in the USA and western Europe. Don’t get me wrong, there are enthusiasts in every culture and nation, but for the most part, piercing in the modern context that we know today is a very western idea. This was apparent to me while traveling through certain parts of Europe and not even receiving service at certain bars and restaurants because of my appearance.

I’m also in the process of having tattoos removed from my neck for the same reason. What means something to me can mean something completely different in another land, half way around the world. I was in Frankfurt, Germany, and got mistaken for a Nazi because of a tattoo on my neck that I received years ago. (I have a needle, barbell and captive bead ring in the shape of a Celtic cross on my neck.) What I didn’t know, but found out traveling through Germany (a culture highly aware of the sensitivity of Nazi symbolism that is lost here in the States), is that the Celtic cross has been adopted by some white nationalist, neo-Nazi and neo-fascist groups. Once I had it explained to me that a guy who winked at me and whispered what sounded like “Heil Himmler” in my ear probably actually thought I was part of one of those organizations, it became painfully to clear that what meant one thing to me, meant something completely different halfway around the world. Couple that with the fact that I was already a stranger in a strange land, an intruder into their country, and I didn’t see any reason to make myself stand out anymore than I already do with all my visible tattoo/modification work. I came back to the States and began laser tattoo removal sessions. I go back for my third treatment soon.

Another story that comes to mind is while traveling through Java and getting on packed trains — standing room only — on our way to see the presidential palace in the capitol of Bogor, we were singled out and had seats open next us, with everyone standing packed like sardines around us. It seemed no one wanted to sit next to the tattooed infidels. Even trying to buy water or bread at a stand was also a bit difficult, as they would just look through you and take the order of the person behind you, completely refusing to do business with someone who was clearly in violation of religious laws of the land with his physical appearance and attire. That doesn’t make you feel too good about the way you come off to others. Of course, being the asshole American and starting to yell or cause a scene would do no good, in addition to portraying me as an American stereotype that I don’t want to perpetuate. So, simply smiling and walking away mildly disgruntled is about all you can do. This was with me looking as normal as I can be, no piercings anywhere, and this was still the treatment I received. I can only imagine these people’s reactions if I had had a two-inch lip piercing or multiple sets of sub- or transdermal horns.

Of course, it wasn’t like this everywhere, but when it did happen, it only reinforced the fact that I was a visitor in their land. It was their home, not mine. I didn’t want to be overly intrusive or do anything to single me out any more than I already had with my very western way of walking, kneeling, dress and tattoos.

Because I’ve had these types of experiences that I feel so strongly about, and know what it’s like to be so visibly heavily modified — especially in another country, and since I don’t plan to live out my life here in America, my viewpoints may be a bit different from others’.

* * *

Derek Lowe

Yes, it is possible to be “too modified” to work in a piercing/tattoo shop … at least to work in some piercing and tattoo shops. I don’t think it’s the rule by any means, but it is something I foresee happening more frequently over the next five years.
 
Just as with hair salons, clothing stores and restaurants (to name a few), there is an increasing diversity with regards to the style and “vibe” that shops are going for. Many new shops, and older shops who decide to remodel or move, are opting for more of a “spa” or “boutique” feel. I personally think this is a smart move, but I won’t bore anyone with my thoughts on that.
 
A studio with a “high-end” vibe is going to tend to attract a high-end client.  That type of clientele, to put it quite bluntly, may not want to look at, let alone be touched by, people with facial tattoos, stretched nostril piercings and three inch earlobes, while getting their piercing or tattoo. Clearly there are giant doses of hypocrisy, ignorance and short-sightedness in that sort of outlook, but that’s the reality of the world where we live. While those of us in the “community” might not understand how someone could feel that way, many people do feel exactly that way about heavier, or abundant, modifications. As a service-oriented business, piercing and tattoo shops have to give some consideration to the experience and comfort level of their potential customers.  
 
Gone are the days when a piercing or tattoo studio could treat people however they wanted, because there were so few shops that clients simply didn’t have other choices.
 
I think it’s more likely to find a “you’re too modified” stance at a studio that is owned by someone who isn’t a piercer or tattoo artist. A non-industry owner is likely going to look at things from more of a pure business perspective, where someone who is a piercer or tattoo artist is more likely to let their passion for their craft, and their personal feelings, influence their decisions, while potentially ignoring the ramifications those decisions might have on their business.
 
To completely rebuke what I just said, I should point out that I work at a very successful shop with more of a non-traditional atmosphere that is owned by a woman who is neither a piercer or tattoo artist. Over the years we have employed people who only had standard earlobe piercings on one end of the spectrum and people with full facial tattoos and half-inch nostril piercings at the other end of the spectrum.
 
For us it’s primarily about having the best person for the job, and not about how many modifications they do or don’t have. However, I won’t say that the extent, or the nature, of someone’s modifications will never ever influence a hiring a decision for us.
 
Anyone thinking that being heavily modified isn’t going to be an issue when it comes to finding a job, even as a piercer or tattoo artist, is potentially being a little naïve and short-sighted, in my opinion.

* * *

Allen Falkner

The answer to this question is not nearly as black and white as you might think. In a perfect world the answer would be no, it is impossible to be too modified to work in tattoo/piercing shop. However, the answer is more complex and has a lot to do with customer relations and other qualities about the potential employee.

Let me give a quick example. Erik (Lizardman) Sprague, arguably one of the most heavily tattooed people in the world, could walk into almost any tattoo/piercing shop and get a job on the spot. Why? Well other than the fact that he’s highly intelligent and incredibly charismatic, he’s also very famous and would draw people into the shop. He’s a professional freak and this is part of his appeal. Would this work for another person? Maybe, maybe not. Like it or not, it all breaks down to the business’s clientele and how to appeal to people that walk through the door.

Yes, it’s true. People that seek out tattoos and piercings want the different and unusual. It really is the nature of the business and to a certain extent visible modifications are expected. I would even go so far as to say that, in most cases, it’s a prerequisite to work in a studio. That said, there is still a limit. People like the strange and the bizarre, but they don’t want to stray too far from their comfort zone. Does this mean someone with implanted horns and full facial tattooed can’t be excellent employees? No, far from it. The issue simply breaks down to what customers will accept. Most would agree that the tattoo/piercing community is more open-minded than most. However, even the most liberal aren’t always the most accepting.

What do you think? Let’s hear it in the comments.

* * *

Please consider buying a membership to BME so we can continue bringing you articles like this one.



What’s that Boy?

There’s trouble at the transdermill?! (I’m really, really, sorry, I couldn’t resist)..

Anyway, IAM: Lassi recently had his buddy IAM: Jussi remove his almost half-decade old transdermals.. Read on for his story and more photos..

“The transdermal in question had been troubling me since the beginning and was swollen ever since it was put in. Finally about four years after insertion the swollen part collapsed in the front and the implant started to come out. I had a nice sparring match where the implant finally busted through the tissue due to a nice shoot-style takedown. (note to self, don’t land implants first..) Jussi started cutting out the implant, we didn’t really have any proper anesthesia (just some Xylocaine jelly) but the whole thing still hurt like hell and it took four hours to remove since I was yelling curse words and pounding the chair after every cut! Must have been pretty damn frustrating for jussi!

The implant was already so sensitive that it was giving me hellish headaches so cutting it out was no picnic. I expected loads of puss and other shit since the implant had been so troublesome over the years, but to my surprise there was just excessive scarring and enlarged cells, no clear reason for the irritation at all. After examining the implant itself I did however find some hints to the reason it was so complicated to heal. There is a deep seam in between the plate and the stud and also the lower surface of the implant is scratched. I have to say I am relieved to have it out but I hope I get to keep at least two of these (which will not happen since transdermals don’t seem to last forever on anyone..)”

John Joyce (Scarab Body Arts) Interview – BME/News [Publisher’s Ring]

JOHN JOYCE INTERVIEW

After being turned on to quality piercing by a dedicated body artist after a series of body piercing and tattoo misadventures as a teen, John Joyce decided to set himself on a career as a piercer. With much hard work — and very long hours — he’s now the owner of Scarab Body Arts in Syracuse, NY, where he’s the head piercer as well as an experienced scarification artist. He’s run his shop and his life with the code his parents raised him with — “anything worth doing is worth doing well” — and he works with a focus on quality materials, quality service, and safety.

BME: Tell me a little about yourself?

I’m thirty years old and grew up just outside of Syracuse, New York. I’m the oldest of three, and had a very normal childhood. We grew up in the country, so most of my childhood was spent making forts in the woods, riding ATVs, or playing hide and seek in the corn fields surrounding our house. My father worked hard, and my mother stayed home to take care of myself, my younger brother, and my younger sister. I did very well in school, was on the wrestling team, and like all kids that grow up in the country I worked hard and partied just as hard. After high school, I went to college briefly for Architecture, and joined the Carpenters Union.

BME: What did you do before you got professionally involved in body modification?

I’ve been working for as long as I can remember. My father is a workaholic. He believes if you want something you should work for it, and you should never have your hand out unless you really need it and have done everything you can for it first, and he instilled that in both myself and my younger brother. When I was a kid, I used to spend summers working on farm in Canada. I learned all about hard work there. They had hundreds of acres in Dacre, Ontario. They milked their cows by hand, and did everything the old fashioned way. When I first started going up there they didn’t even have electricity. I would get up every morning and get on a 3-wheeler and go find the cows with a couple herding dogs, we would bring them back to the barn and that was the start of my day, then it was on to working in the hay, or the pigs, or the chickens, or whatever. They were some very long days, but I loved it. Any free time was spent playing on the lake, sitting around a fire, and just enjoying the outdoors.

When I was about fifteen I started working for a commercial flooring company on weekends or whenever there was a break from school. I started as a laborer, and by the time I was seventeen I was installing floors by myself and sometimes had guys working underneath me. This is when I joined the Carpenters Union. I worked at three different flooring companies by the time I was nineteen and did some warehouse work at one of them. I put a lot of hours in and even though I haven’t been doing it for eleven years, my knees are still a mess from it. I would look at the older guys that had been crawling around on concrete for twenty years, and they could barely stand. I knew I needed to figure something else out.

Since I had been reading blueprints for the last few years while doing floors, and I liked to draw and design things, Architecture seemed like a good thing to go to college for. I did very well in school and liked it quite a bit. There was a lot of creative freedom at first and even though it was a lot of work, it was fun. Then, they took that creative freedom away, and it just became tedious, and soooo much work. My hats off to anyone in an Architecture program at any University.

I had a bunch of other little jobs as well. I worked retail at a store that was a lot like Hot Topic, only before Hot Topic was around, as well as a Halloween store. I also served ice cream at a Friendly’s, and when I was very young I mowed lawns at a cemetery with one of my uncles.

BME: But these days you’re the owner of a tattoo and body modification studio.

Yes, I currently own Scarab Body Arts in Syracuse, NY. I do full body piercings, henna design, scarification, and I am also a NY State Licensed Massage Therapist. People can get in touch with me through the studio email, [email protected], the studio phone number is 315-473-9383, the studio myspace page is http://www.myspace.com/scarabbodyarts, and my IAM page is j_scarab.


Scarab’s reception area and piercing room.

BME: When did you first become aware of body piercing?

I’m not sure when I first became aware of piercings. I was always around people with tattoos — my dad had two, my mom had two or three, and their friends had a couple. Other than ear piercings I never really saw anyone with piercings, and this was before you saw people with piercings every time you turn on the TV. I guess my first exposure to piercing in a broad sense was National Geographic Magazine. I grew up next door to my grandfather Ray — he was a man full of knowledge and stories.

Since this was before every house had at least one computer and was hooked up to the Internet, I did all my research for school papers at his house. He had not one, but three computers, can you believe that, haha? He also had two or three full sets of encyclopedias, and in chronological order he had every issue of National Geographic Magazine. Whenever I was doing research on outer space, or underwater sea life, or whatever, I would run across these pictures of people in Africa with stretched lip piercings, and stretched earlobes. I though it was amazing! I started going to see him every time he got a new issue to see the photos in these magazines. I was intrigued and the first time I saw a septum piercing in one of the photos, I couldn’t help but wonder how it was done, and how I could get one. It still to this day is one of my favorite piercings.

BME: Was that your first piercing?

No, my first piercing was my earlobe. I was probably thirteen or fourteen and had been bugging my mother about getting it done. She finally agreed, but only if I let my uncle do it for me. Since I was the oldest in my family, my uncle was basically my older brother, and I thought he was the coolest dude around. I mean, he introduced me to Pink Floyd The Wall, Led Zeppelin, KISS, Motley Crue, and Mountain Dew — all the good stuff, hahaha! Anyway, how could I turn that offer down? So, to my mother’s surprise, I said yes. My uncle took one of his piercing studs, soaked it in rubbing alcohol, and stuck it through my ear. The whole time my mom was telling me I could back out at anytime. I know it wasn’t the cleanest, safest way to to do it, but I wouldn’t have had it any other way. My favorite person in the world was giving me my first piercing, while listening to Led Zeppelin! It was my very own coming of age ritual, and I loved every second of it.

I still hadn’t met anyone with any professional piercings done, and hadn’t seen any, until my parents made the mistake of taking me to get my first tattoo. I started asking for a tattoo on my sixteenth birthday. I didn’t know what I wanted. I just wanted a tattoo — I needed a tattoo. My father had one, my mother had one, and all the adults I looked up to had one, so I thought I should have one too. When I turned seventeen, I got my first tattoo. My parents took me, and my mom got one with me. I had no idea what I wanted, and it was basically a flash shop, so I started looking at the walls. I figured since I was a scorpio, I would get a scorpion. Super original huh? Haha…

Well, I found a flash page that had some scorpions on it and I picked one out. The one I wanted had a rose in its claw, so I told the guy I wanted that scorpion without the rose. He told me “NO.” He said, “that scorpion comes with a rose — if you want one without a rose, pick a different scorpion.”

I was seventeen, maybe 115 pounds, and he was in his forties and probably 250 pounds. I didn’t know any better and man was that guy intimidating. So guess what, I got a scorpion with a rose. Fan-fuckin-tastic!!!! For about six months anyways. Then I hated it. But while I was there, for the first time, I saw a jewelry case full of body jewelry, and I saw a portfolio full of things that I had no idea you could pierce. This got my wheels turning and I couldn’t stop thinking about getting something — anything — pierced. Two weeks later I went back and got my tongue pierced. I asked him about piercing my septum, but he told me I wouldn’t be able to hide it until it was healed so I settled on a tongue. He didn’t ask for ID, he didn’t ask anything actually, just sit down, pierce and done. On the way home, the ball fell off the barbell and I almost lost the piercing. On top of that, it was not pierced straight at all. That was my first professional piercing, and the first of many not so great experiences.

BME: When did you decide you actually wanted to become a piercer?

Once I got my first piercing, I was hooked. I started looking into getting other piercings done. Unfortunately, even though my parents were fine with me getting tattooed, they didn’t understand my desire to get pierced. Out of respect for them, and maybe a little out of fear, I stuck to piercings that were easy to hide. And thus began my journey of bad piercing experience after bad piercing experience. I got my nipple pierced, which turned out to be placed far too deep. I got my tragus pierced, with jewelry that was far too large. On top of that, after the needle was in, the guy left the room to take a phone call before putting the jewelry in. After this I got my nipples repierced, and while one came out perfect, the other side was horribly crooked. I had a Prince Albert piercing done that was far too deep and done with jewelry that was too thin. It ended up tearing and bleeding like crazy. I even had problems when I went to get me lobes pierced at 10 gauge. The guy pierced over the one hole I had and it went well, but the other ear he lost transfer on. He reinserted the 10 gauge needle and lost transfer again! This happened four times before he got the jewelry in. He turned my earlobe into hamburger. There wasn’t a lot of information back then and I went through every studio around. I could go on, but I think you get the point by now. I was always taught that anything worth doing is worth doing well. Obviously the majority of piercers then didn’t grow up with that mentality. It wasn’t like today when you could walk into any number of $20 piercing studios to get that kind of service. I was paying just as much, if not more, than I charge today for piercings, and that is with much lower quality jewelry. I would say I was paying an average of $60 a piercing, sometimes more.

Eventually I was recommended to a new piercer that had just set up a small studio in Syracuse. It took me a while to find, since it was hidden in the very back of a salon with no sign outside. Once I found it, I decided to get my tongue repierced. I was completely amazed at the professionalism of this piercer. his knowledge, his demeanor, and his bedside manner — everything was top notch. I started having him redo all the piercings that I had done from other studios. He showed me a septum retainer and explained that I could start with that to hide it. Finally, I could get my septum pierced — the one piercing I had wanted for sooo long. I became a very loyal client and we became friends. I watched his studio grow into a new location, I watched him bring in a tattoo artist, and I spent as much time as possible in his studio.

One day he mentioned to me that he was thinking about apprenticing someone. I jumped at the chance. He told me that it was very important to him that whoever he brought in knew about the history of modern piercing, and that the person proved themselves. He gave me all kinds of articles and interviews to read. He gave me a copy of Modern Primitives, which I read cover to cover and was completely in awe of the people and the stories in it. He showed me PFIQ, and Body Play magazines. I loved all of it. He introduced me to BME, where I found even more information — I couldn’t get enough. I read about Fakir, Jim Ward and Gauntlet, Keith Alexander, Jon Cobb, Sailor Sid, Doug Malloy, and more… I figured a good way to prove I was serious was to sign up for either the Fakir Intensives in California, or the Gauntlet courses in NYC. I filled out the information for the Gauntlet courses, I booked a room at the Gramercy Park Hotel and I spent a lot of money getting the trip together. I received my Gauntlet handbook, read it cover to cover and couldn’t wait for start date. I took a bus to NYC, found my hotel and decided to walk around and find where the classes were scheduled to take place so I could get there on time first thing in the morning. I was only about a block and a half away, but when I got there the doors were chained shut and it looked abandoned. Being a Sunday I convinced myself that they were just closed on Sundays and all would be fine in the morning. First thing Monday morning, I show up at the address, and it’s still chained up. I waited around for a while and no one else showed up. This was my first time in NYC and I had no idea what the hell I should do. I went back to the hotel, made calls to every number I could find on the paperwork I had. Most of the numbers had been disconnected, but I eventually got a hold of someone. They told me that they were very sorry, and that I must of somehow fallen through the cracks because everyone was supposed to be notified that Gauntlet was no longer in business and the classes were canceled. I asked about getting my money back, and was told that everything was tied up in legal matters and it was just gone.

So here I was, in New York City for the first time, nothing to do, and stressing about all the money I was out. I found as many piercing and tattoo studios as I could and checked them all out. I went to Venus, I went to NY Adorned, I went to some place called East Side Ink (I’m not completely positive that’s right), but at this place I talked to guy named Brian who said he had just left a position at Gauntlet and was very sorry to hear that I got stuck in the middle. I called Shawn, the guy I was hoping would train me and he was also surprised at what had happened but said as soon as I was home, my apprenticeship would start. I guess I proved I was serious about getting into the industry.

I loved every second of my apprenticeship. I was there six, sometimes seven days a week, and on top of that I was working thirty to forty hours a week to pay my bills. I soaked up everything I could, and couldn’t of been happier.


Two of very, very many happy customers.

BME: What did your family think about your decision?

Starting off, my family was apprehensive. My father especially just didn’t understand piercings. That being said, even though he voiced his concern constantly, he was still very supportive. His main concern was stability. He’s a family man and he worries a lot. Not getting a steady paycheck, not having health benefits, and the lack of job security really made him nervous.

Those concerns really bothered him when I started my own studio. Like I said, he worries a lot, and he knows how hard it can be to start a new business. Not having the stability of a paycheck every week, and probably never having health benefits, really made him nervous. But he supported me through all of it. He helped me with build-out of the new studio, he bought me lunch when I couldn’t afford it, and stood by my side through all the tough spots. I really can’t thank him enough. Now that my studio has been open for a while, he’s very proud. I took a chance, I worked my ass off, and I pulled it off.

BME: Now that you’re on your own, how do you continue improving your skills?

I’m always improving my skills as a piercer. I’ve been doing this for almost eleven years now and I still change how I do things. There is always someone better out there and you can always strive to be better. New techniques, new tools, new products, there is always something new to learn. I remember the first time I talked to Tom Brazda online. I had already been piercing for years at this point, but in one conversation he opened up so much too me. It made me realize how much more there was to piercing. That guy is a piercing nerd — he is so knowledgeable, so open, and so willing to share. There are so many people out there like that. They know so much and are so willing to help other piercers. I think that is why so many of us “old timers” are looked down upon for our view of the new breed of piercers. When I first started peircing I talked to everyone I could to gain information, and there are so many people now who are completely willing to share that info — Tom Brazda, Ron Garza, Brian Decker, Dave Gilstrap, Pat Tidwell, Brain Skelle, myself… The list is endless, but the newer breed of piercer doesn’t seem to care. They don’t look for that information before they try something new — they just jump in. The information is so much easier to get now, and they just don’t seem to care as much. The learning forum on IAM is a great example.

BME: Are you an APP member?

Oh the APP… where to begin…

I am not a member but I love the APP. That being said, I think whether you are an APP member or not, if you are a piercer you should make every effort possible to attend the APP conference. I spent years piercing in an area where I was the only one using implant grade internally threaded jewelry, and practicing proper aseptic technique. It was amazing going to the conference and being surrounded by piercers with the same ethics. I learned a lot, not just in the classes, but in the discussions that happened throughout the week, over food or over a beer. I made some great contacts, and great friends.


Relaxing at the APP convention.

BME: What secondary education do you have on top of your apprenticeship?

I keep my CPR, first aid, and bloodborne pathogens certificates up to date. On top of that, in 2006 I enrolled at the Onondaga School of Therapeutic Massage. I took Anatomy & Physiology, Pathology, Myology, and so on… We talked a lot about how the body heals, and it really went hand in hand with my piercing back ground. I graduated in December 2006 with the Salutatorian award. I would have had valedictorian but they dropped a couple points off my grade point average for missing time to go to the APP conference and for Scar Wars in LA. Going through massage school really got me excited again about learning new things. I also take classes yearly at the Association of Professional Piercers conference.

BME: Do you see piercing as an artform or as a craft?

I think piercing is more of a craft, at least on the technical side of it. But to be a good piercer you need to be able to put an artistic spin on it. You need to be able to look at someone’s face and be able to see if that Monroe piercing is going to look good where you have your mark, or maybe a millimeter or two to the side. Anybody can learn the skills to run a needle through someone and put jewelry in, but a good piercer takes placement and angles, and everything else into consideration to make it look as good as it possibly can.

BME: Do you think they’ll ever make a reality TV show about piercing? You could star on “Syracuse Steel” or something?

Oh man, I hope not. Who knows though — I never would of guessed that there would be shows like Miami Ink, or LA Ink, or London Ink, or Wherever else Ink. I don’t know about a show just on piercing, but I think sooner or later instead of just tattoo studios, there will be studios that offer both tattoos and piercing on these shows. Piercers meet some interesting people so I’m sure it’s only a matter of time. In fact, one of the artists that work with me, Mike Haines, has been saying for years now that they need to do a show on a whole studio environment. He started saying that back when American Chopper first started and the bike shows were just coming out — this was before Miami Ink and all those.

I’ve had so many great clients over the past decade. I had a woman who had been in the studio with her partner a few times and eventually asked me to pierce her as well. It was a very emotional piercing not only for her, but for me as well. She had been abused as a child, and since then had never had a male touch her or look at her without clothes on. Even her doctors were female. Watching me work with her partner eventually made her comfortable enough to ask me to work on her. We did a Christina piercing — there were many tears shed, but there were also many smiles and hugs when it was all over. It was great to be a part of her self discovery, her growth, and her reclaiming of a part of her.

I once had a 68 year old man come in for a Prince Albert after his wife died. He had always wanted one but his wife just didn’t understand. Out of respect for her, he never got it done. Once she passed away, he decided it was time. First and only piercing he had ever had, and he did fantastic. Smiled through the whole thing.

I also had a woman that was in her seventies. She had never had a piercing before and had always worn clip on earrings. Every year for Christmas and other holidays people would buy her all kinds of nice earrings, because they had no idea her ears weren’t really pierced. She decided it was time to wear some of those, so she came in. Even though it was just a set of 18 gauge earlobes, she was so happy and excited. She came in a couple times after that showing me some of the jewelry she had never been able to wear in the past, now in her ears.

I just recently had a couple come in for their 25th wedding anniversary. For their first piercings ever, she got a vertical hood and he got a scrotum piercing. It was great — they were a lot of fun, happy, and everyone left with smiles.

One of my absolute favorite clients is a guy named Aaron. He originally came to me about his ears. He had two stretched lobe piercings in both ears, and the skin between them was dieing due to poor circulation. I scalpelled the holes into one larger hole. He had a bunch of piercings done at other studios in the past and had problems with most of them. He was surprised at how easily everything healed up after I worked on him and he became a very loyal client. I have since done a number of procedures on him, including a bunch of piercings, dermal punches, and a lip scalpelling. He now wears a 9/16” labret plug in his lip. He was amazed at the difference the higher quality jewelry made and has had no problems with any of his piercings since having them done at my studio.

I really like being apart of people’s lives like that. So many people get piercings to mark an occasion, whether it’s a birthday, an anniversary, a new job, whatever, but it’s always a positive thing and it’s great to share that with people.


Star surface piercing projects.

BME: Do you have a favorite piercing to do?

I’ve been doing this a long time now, and at this point I don’t really have a favorite piercing to do. It’s more about the person now. I like working on people and making people happy. If the client was fun and we had a good time doing the piercing then that is what it’s all about now. It amazes me how many people come in to get a piercing or a tattoo for that matter, and are a complete asshole. I just don’t get it.

That being said, I still love septum piercings. I also really like philtrum piercings [central upper lip piercings], and my new favorite has to be high nostrils. I absolutely love the look of high nostrils.

BME: Do you have a least favorite?

If the person is an ass, then I’m not going to enjoy working on them very much. I really don’t mind doing any piercing but for me the least favorite piercings in general are tongue web piercings and upper lip frenulums — I just don’t like them.

BME: Which do you find the most technically challenging?

It’s hard to say. Everyone is built so differently; a piercing that is very easy on one person can be a complete pain on the next. Every piercing is going to be different, and as soon as you think you’ve seen every possible shape of a navel, a hood, an ear, or whatever, someone will come in with something completely new. I mean, try lining up a pair of nostrils on someone who broke their nose three or four times, or finding the perfect spot for a surface piercing where there is limited movement — it’s great! I like the challenge, it keeps me sharp, and keeps me growing as a piercer.

BME: Is this a career that you’d recommend to others?

I absolutely would recommend piercing as a career. But, you got to love piercing, and I mean really love it. The cool factor wears off, there isn’t a lot of money in it, the hours are usually long, and it’s not always a glamorous job. A lot of piercers work another job, especially during the slow season. I’ve been working at least six and usually seven days a week for most of the last ten years. I remember a year or two after I opened up, I took what I made, figured out the hours that I worked, and it worked out to $2.68 an hour. It’s really just the last two years that I’ve made even a decent amount of money, and it’s not a lot by any means, especially once you factor in the hours. So yeah, you have got to love it, because you’re not going to get rich being a piercer.

BME: Having gone through an apprenticeship yourself, have you apprenticed anyone?

I get people asking for apprenticeships a couple times a week. For the longest time I had no desire to apprentice anyone. I just didn’t see the work ethic, or the determination in the people asking that I had. I finally decided that I needed to bring someone in. He was someone I had pierced a few times, seemed really interested, and very eager. He reminded me a lot of myself when I first got into the industry. I explained he wouldn’t be making any money at all for about a year, and he wouldn’t be piercing anyone for at least six months. I explained the long hours he would be putting in between being at the studio plus working outside of the studio to pay his bills. Everything went really well, he was right on schedule with everything I had planned out, and we got along very well. He really seemed to fit in with the studio. I brought him to Vegas with me for the APP conference, introduced him to people that I had looked up to for years, we took classes together, it was great .Then about eight months in, he started slacking. After about a week of that, he just didn’t show up. People don’t realize that this isn’t an over night process, and it seems cool at first, but it’s a long road, and it’s not always fun, it’s not always exciting, and people just get impatient. I was very surprised when he stopped coming in — it caught me completely off guard. I guess somewhere in there he decided he wanted to be a tattoo artist instead, and piercing just wasn’t in him. I wish he had just talked to me about it, but he decided to just bail.

I waited a little over a year before I even thought about bringing in another apprentice. I had all kinds of offers, but I was really let down, and just didn’t want to deal with it. I recently brought in a new girl, Shelly. I’ve wanted a female piercer here for a long time. She was someone I had done a bunch of work on, proved that she was serious about piercing, took care of her piercings, and was always respectful and nice when she was in the studio. It always amazes me when people that don’t take care of their piercings, or who come in with an attitude ask me to apprentice them. Shelly just started her training in November, so she has a long ways to go still, but so far things are working out very well.

BME: I assume you’re in this for the long haul?

Man, I hope so! I just recently turned thirty and just had my ten year anniversary in this industry. That means a third of my life has been devoted to being the best piercer I can be. I still love piercing, and have no intention of quitting. I do however want to change my focus a little. I can’t keep working seven days a week — it’s just not healthy. Once Shelly is done with her apprenticeship, I’m hoping I can take some more time and devote it to doing massage therapy. I have a separate space for that now, but most of my time is still taken up by piercing. There are so many different modalities and techniques that it’s opening up a whole new area of research and training that I want to do. So, I’ll probably still be working seven days a week, hahaha…


John getting tattooed.

BME: It seems like a lot of piercers seem to “burn out” after a decade and leave the industry… Why do you think that is?

I’ve noticed the same thing, and it’s something I worried about as I approached the ten year mark. Shawn, who I apprenticed under lasted about ten years in this industry and then basically walked away. For him, I think most of the stresses that pushed him out of piercing were from owning a business, not so much from piercing itself. That is something that I can definitely relate to now that I own my own studio. I love piercing, no matter how stressed I am, or what I’m stressed about — piercing actually calms me. The stresses from owning a business on the other hand just pile up. It’s a very up and down road, and you have to be able to look at the big picture and not focus on things on a daily or even weekly basis. If you can’t, you’ll drive yourself crazy. I think the biggest thing that most piercers end up walking away from is the seeming lack of responsibility from clients and from other piercers. It’s frustrating when you are doing everything you can to ensure the highest quality, safest, experience possible and all the client cares about is saving $5 somewhere else. The majority of piercers out there are clueless — they don’t know what type of metal they are using, or why they should be using something else, and they aren’t up to date with aftercare methods, and they have no idea what aseptic technique is. $20 or $30 piercing shops are popping up all over the place. There is no way you can offer a piercing at that price with high quality jewelry and be doing everything properly. It just isn’t possible. It gets very frustrating at times when you are doing everything you can to do things the right way and to educate the public, working longs hours for little pay, and it goes unappreciated. There have definitely been times when I’ve been at the point where I’ve been ready to just throw in the towel and go back to installing floors, or doing anything. But then I get one of my regulars walking into the studio and I remember why I love doing what I do.

BME: So that’s what keeps you coming back 🙂

I make people happy. People leave smiling and excited, and wanting to give me a hug because I pierced them. It’s a great feeling. Sure there are the asses that just want to save $5 and are rude, and don’t care about their safety, but fortunately, I have some of the most loyal clients around and they make it all worth while.

BME: Do you get many “weird” clients?

You know, I don’t meet nearly as many “weird clients” now as I did when I first got into this industry. But, I’m just going to change that from “weird”, to “interesting” — that sounds much better. When I first started piercing, there was still a huge percentage of slave-and-master and leather daddy clientèle coming into the studio. I still get some now, but not nearly as much. It opened my eyes very early on to how diverse people were and I loved it. I met so many different types of people. I’m not gonna lie — I kind of miss those days. It made the job a lot more interesting when I was doing a couple scrotum ladders a week, or large gauge PAs, or whatever, compared to now, when it’s just nostril after nostril.

One story comes to mind right away though, and I don’t know how many people can ever say they experienced this, so I feel pretty special, hahaha…

This was years ago, but we had a regular that was full of stories. He had been castrated, had a urethral reroute, had male breast implants, two inch earlobes (which were very very uncommon at the time), and so on… He still had a fully functional penis, and right below that where his scrotum used to be, he had an opening for a urethral reroute, and just below that he had a vagina made. He had a conversation with the owner of the shop about his procedures and offered to show him. They called me into the room, where I watched this man jerk off with one hand, insert a metal sound into his vagina with the other hand, and ejaculate out of his urethra relocation. Now that is Amazing Stuff!

BME: Oh — yes — he’s great! I know exactly who you mean (this individual is also featured in the ModCon book). We’ve already talked about this a little, but what do you think is it that makes you — or anyone — a good piercer?

I think a good piercer is someone who knows their limits. Knows when they need to do more research and knows when to say no. So often I see piercings done on people whose anatomy just doesn’t allow for that particular piercing. A good piercer needs to know more than just how to push a needle through the skin — anyone can do that. They need to practice and understand aseptic technique. I’ve seen piercers change gloves at the weirdest points during a procedure. The don’t understand when or why they should be changing gloves — they just know they are supposed to change their gloves at some point. A good piercer needs to know what they are putting in people. So many piercers have no idea what type of steel they are using. They don’t know the difference between “316L”, “316LVM”, or why they should be using “316LVM F-138”. A good piercer understands how the body heals and understands the aftercare they recommend, and knows how to troubleshoot if there is a problem. A good piercer is confident, but not arrogant. Most importantly, a good piercer is always learning.

BME: We talked about some of your oldest clients, but what have your youngest been? What’s your policy and feeling on age requirements?

The youngest person I have pierced was five — it was a set of earlobes. My insurance company has since changed their policy and I am now no longer allowed to pierce anyone under the age of fifteen.

It’s really hard to say, “at such and such an age, you are responsible enough to care for a body piercing.”

Everyone is so different that it just doesn’t work that way. I’ve had thirty year olds come in and act like complete asses. They don’t listen to me when I go over after care, they act very immature, and I can’t get them to stop text messaging long enough for me to go over anything with them. All they want to know is, is it gonna hurt, is it , is it, is it?? A couple weeks later they call back or stop in complaining that it’s not healing, and when I ask them a few questions, I find out they are doing everything the exact opposite of what I told them. Then I’ve had fourteen year olds come in, ask what the jewelry options were, ask me about sea salt soaks before I even mention it, ask about retainer options, and other jewelry once it’s healed, and a bunch of other good questions. Questions that show that they have done some research and are completely ready for the piercing and they heal with no problem at all.


Large scale skin removal: grasshoppers mating, done in two sessions.

BME: On a technical level, what range of tools do you use to penetrate the skin?

I use needles, scalpels, and dermal punches — it really depends on the situation. In my opinion, it’s a matter of the right tool for the job. A 5mm dermal punched cartilage piercing is going to heal a lot easier than a 4 gauge needled piercing. I know this from experience because my conches were pierced with 4 gauge needles and immediately stretched to 2 gauge about eight years ago. Not only did this completely suck balls, but the healing took forever and was very problematic. I also have been using punches for all my surface work for a couple years now. I have found the punch and taper method to work far better for me. I know a few piercers who have great results with a needle, but for me the punch and taper technique has drastically improved the success rate of surface piercings that I have done. Anatometal’s new flat surface bars don’t hurt either [hey, Barry, maybe I can get some free ones for the plug, hahaha?].

I’m not a fan of using dermal punches on soft tissue like earlobes. I think in that instance, you want to leave as much tissue as possible for future stretching, so a scalpel is better off. Like I said, it’s the all about the right tool for the job, and a proper understanding of how to use that tool.

BME: What do you think of ear scalpelling?

I do quite a bit of ear scalpelling. Most of the time it’s to redirect the piercing. An example that comes to mind is on one the tattoo artists that work with me, Rick. He had his ears stretched to 1/2” from regular gunned piercings. They were drastically uneven — one was very far forward and one was very far back. I scalpelled them up to 3/4”, cutting one side only in the front and one side only in the back. It evened them out very nicely and he is now at 1 3/8”.

BME: How do you draw the line of what you will and won’t do?

If I think it has a good chance of healing, and not cause any problems, I’ll do it. I’m not into shock value and doing piercings just to get the photo, knowing they’ll probably be taking the piercing out in a couple days or weeks. Under the collar bone piercings completely freak me out. They go so deep into the body cavity and in some people there is a chance of hitting lung tissue. Most people don’t realize how far up your lungs actually go! Eyelid piercings just seem like a bad idea — I mean, come on!

It’s not that I don’t think people should be able to get these things done. I absolutely think they should be able to, but I’m not comfortable doing it. There is too much liability involved and if something goes wrong, even if it’s months later, that person could very easily come back after me. I love seeing people push the boundaries when it’s done safely, and the research has been done first, and the parties involved take full responsibility for their actions. I’m not just talking about whoever does the work, but also the person who gets the work. I’m reminded of two recent ModBlog posts. One was the 1/2” or whatever it was Achilles piercing, and the other is the implant gone wrong on the girls leg. That Achilles piercing was very impressive, and I absolutely loved it. I know a lot of piercers gave you a lot of shit for posting it, but I’m very happy you posted it. I love seeing what the human body can pull off, what can be done to it, and how far it can be pushed. That being said, I’m not going to pierce anybody’s Achilles, I can promise you that! The girl with leg implant is a great example of the client taking responsibility for her actions. Things can and do go wrong, and everybody was ready to jump on the practitioner and wanted him called out. She wanted an implant in her leg, she took the time to seek out a practitioner, she knew the risks, and unfortunately it didn’t work. She understood all of that before hand, and when it didn’t work, she didn’t get all pissed off and want this practitioner’s head on a stick. Even though it got pretty bad for her, she took responsibility for her choices. If the practitioner did something wrong, and was negligent in any way, and she could prove it, then sure, go after him. What people need to understand is sometimes things just go wrong, it’s not anybody’s fault — they just do. When that happens, you need to do exactly what this girl did, and just call it a loss, deal with the consequences, and move on.

Sometimes shit happens, and it doesn’t mean you get to sue somebody or are entitled to anything. We’re pushing limits here, and there are risks with those limits, know them beforehand and be willing to take them, for better or for worse.


Fresh and well-healed scarification by John Joyce.

BME: Over the ten years you’ve been in this industry, how has the public attitude toward piercing changed?

Piercings are definitely becoming more common and more acceptable. Sure it can still be a hard to get a job with a lot of facial piercings or 1 inch earlobes, but it’s a hell of a lot easier than it was ten or even five years ago. I’m getting a lot more people in their thirties and forties who work in office settings getting nostril piercings. I still hear people complain all the time about how they don’t get treated with respect because of their piercings. While I’m sure there are times when that is true, I think a lot of it is also in how you carry yourself and how you present yourself. Ten years ago I had a lot of visible piercings, far more than I do now. This was definitely not the norm back then, and I never felt like I was being treated poorly. I treated people with respect, and they gave it back to me. If you act like a punk kid, then you’ll be treated like one, whether you have piercings or not.

BME: Are you still getting piercings yourself?

I have settled down a lot with my piercings. Many have been retired, but I still have quite a few. There are a few things I still want to do, my high nostrils being one of them. Unfortunately, I do not have a lot of faith in the majority of piercers around here. This means I either travel the four and a half hours to a piercer I trust, like did for my 4 gauge nostrils, or I wait until I’m done training Shelly. What could be a better test for an apprentice than to pierce the one who trained her?

BME: Finally, is piercing a trend?

Well, when I started my apprentice just under eleven years ago, my grandmother told me that piercing was just a trend, a fad, and then what was I going to do? When I opened my studio, just over six years ago, she told me the same thing — she still loaned me money to get started though. So, is piercing a trend? Sure, just like tattoos is a trend — a couple thousand year old trend!


John cutting at the ScarWars convention.

BME: A lot of piercers seem to move into scarification and implants in their later careers, yourself included.

I’ve been performing scarification, both cutting and branding for about six and a half years. It’s just within the last three years that I’ve really become comfortable with my cutting skills, especially removal. I really love doing scarification pieces, and while I don’t get to do it as often as I would like, I’ve been fortunate enough to do some great pieces on some great people. Shawn, the guy that apprenticed me for piercing had taken the Branding Intensives offered by Fakir. He actually did quite a few brandings and I learned a lot from him. Implants are something that I was very interested in for a while. I got into them a little, got a lot of info, and performed a couple on close friends. The few that I did healed up very well, and are still in to this day, but doing them stressed me out tremendously. I still perform genital beading, but for now I’m not really interested in doing transdermal or subdermal implants.

BME: Tell me about how you became proficient in doing scarification?

Shawn taught me quite a bit and I eventually started doing some brandings under his supervision. He eventually started doing cuttings on some of his clients. This, he didn’t master quite as well as branding, and even though he wasn’t what I would call a good cutting practitioner, I still learned a lot from watching him. Eventually, one of the girls he had worked on asked me to redo a piece he had done on her.

I ended up doing a few pieces on her, simple line work and geometric stuff. For a long time that was all I did. I couldn’t have asked for a better person to try new techniques on. She was very open and took the process like a champ. I tried different blades on her, found what worked best, and slowly started doing more intricate pieces. For the first couple years, all I did was single line work — no removal, and mostly geometric shapes. I constantly checked portfolios of artists I respected, and I still do. People like Ron Garza, Blair, Steve Haworth, and Lukas Zpira. Later I learned about Ryan Ouellete, Brian Decker, Wayde Dunn, Jessie Villemaire, Dave Gillstrap, and so on. These guys were doing amazing work, and some of us were learning around the same time so we were all growing together. I asked questions about blade types, about aftercare; I asked anything I could think of. Shawn Porter started the Scarification Forum and I asked if I could participate. This was a great place to get info and share photos, and get critiqued. I was invited to work at Scar Wars I [scarwars.net] in Philly, and unfortunately I had to back out because I had just started massage school, but I didn’t pass up the opportunity to go to Scar Wars II in LA. I did a few pieces there, including a collaboration with Brian Decker. It was great watching everyone work, and I learned a lot. I did quite a few pieces at this years Scar Wars III in Philly, including another collaboration with Brian, and I got to work alongside Wayde.


Collaborating with Brian Decker on a cutting.

Something I was really surprised about at this past Scar Wars III in Philly was the lack of learning artists in attendance. There are so many people in the Scarification Learning forum, and there are even more people offering scarification that have a long way to go. I can’t stress enough how much knowledge there is to be gained at an event like that. It’s an opportunity to watch the best of the best of the best work, and pick their brains. It’s an unbelievable opportunity, and I think it is really foolish to miss it. It goes back to what I was saying about some of the new piercers. It seems like the easier the information is get get, the less people want to take advantage of it!

BME: What types of scarification do you do?

I do strike and cautery branding, as well as single line cutting, removal, and just started with some of the cross hatch shading technique. That is something I’m still experimenting with. I do far more scarification by cutting than I do by branding though.

BME: I know you have Architecture experience, but what’s your artistic background and what is your design process?

I’ve been drawing for as long as I can remember. In high school I spent a lot of time in the art room, even though I wasn’t enrolled in art classes. One of the instructors was even convinced I was one of his students. I started taking design classes my junior year in high school, and then enrolled in Architecture courses in college, so most of my formal training has been more in design than art. I’ve always been surrounded by artists though. Growing up, my uncle who was an amazing artist. He did a lot of pen and ink, and some three dimentional sculptures. I spent a lot of time with him and tried to emulate his work. Once in high school, most of my friends were art majors, which is why I spent so much time in the art room. And of course for the last ten years, I’ve been working side by side with different tattoo artists.

My process for coming up with design for scarification is very similar to a tattoo artist. I do a consultation with the client, take some notes, and talk size and placement. Then I use all sorts of reference material and do some sketches. I always try to keep placement and body movement in mind, so I can place the piece so that it works and flows with the body. Sometimes, I’ll have one of the tattoo artists give me a hand with a design, and we all kind of work together.


Cutting with skin removal, fresh and healed.

BME: Is your scarification clientèle at all different from your piercing clientèle? Is it something you offer commercially?

The clientèle really isn’t any different. Most of the people I have done scarification on were originally my piercing clients. I do far more scarification on woman than I do on men, but that’s true of piercing as well. For a long time I just offered it to people I knew, but now I offer it commercially. It’s not a huge percentage of my income, and in fact, If I stopped doing scarification all together it wouldn’t really affect my yearly income. More and more people are asking about it, so hopefully that will change.

BME: What does the future hold for scarification in your opinion?

I don’t think it’ll ever be common enough for me to do it exclusively, at least not during my career, but I do think it’ll become more common. In the past it was mainly just people who worked in the industry, or who were pretty close to someone in the industry that got scarification done. At this point I’ve worked on a very wide range of clients. I did a branding on a guy’s shoulder who was in his mid thirties and who drove from Connecticut to get it done. He was very conservative looking guy, and his only real concern was if it would affect his golf swing. I’ve worked on a girl who had some existing scars she wasn’t happy with, and wanted to make it a more positive thing. I’ve worked on people who weren’t comfortable getting tattoos because the thought of a foreign substance being put in their skin made them uncomfortable. Scarification has come a long way since I started doing it. The work being done now has so much more detail in it than it did back then. Especially now with the new shading technique pioneered by Dave Gilstrap, which Wayde Dunn has really ran with as well. It’s making scarification more appealing to a wider range of people.

BME: Thanks for taking to us about all this!


Shannon Larratt
BME.com